TCS Home Page

Tobin Cinema Systems Catalog Index
Text Box: Sound Exciter Lamps BAK 4 volt .75 amp (200 hours at 4 volts) $10 each for Bell & Howell mechanisms BRS 4 volt .75 amp (50 hours at 4 volts) $2.50 each for Bell & Howell mechanisms, sold in lots of 10 only (Substantial quantity in stock) BSK 6 volt 1 amp (100 hours at 6 volts) $10 each for Kodak Pageant mechanisms Cables for TMC, TMC2, TMC2-LCD Milliframe Controller and TVCe Videoframe Controller*: NOTE: These WILL NOT FIT models TMC55Aa, TVC. Fischer cable is $135.* For Arri 16-SR, 16-SR-HS and others and some 35mm cameras with the 11-pin Fischer connector. (4 left) WPI (formerly Amphenol) cable is $60. For TCS TXM-10B, -10S, -12, -14, -15, -19 crystal motors and controls. Can also be used with Aaton cameras and TMC2 if 0.1mF capacitor is added ($10 extra) and if onboard battery is not used. (1 left) DE-9 M to F cable is $10. For TCS TSC, TXM-D, -18, -20, -20B, -20K crystal motors and controls. Also these can be used as a 6 foot or 3 foot (specify) extension for other cables listed. (2 6 foot ones left, 5 3 foot ones left.) RJ-12 cable is $30. For TCS TXM-21, -21A, -21Aa, -21Ab, -21C, -25, -25A, -26, -26B crystal motors and controls. (2 left) 3.5mm cable for TXM-22, TXM-22A is $30. (2 left) (The TVCe cannot be used with the TXM-22 or TXM-27 crystal motors.) Cables for TMC-55Aa Milliframe Controller and TVC Videoframe Controller*: NOTE: These WILL NOT FIT models TMC2, TMC, TVCe. WPI (formerly Amphenol) cable is $60. For TCS TXM-10B, -10S, -12, -14, -15, -19 crystal motors and controls. Can also be used with Aaton cameras if onboard battery is not used. (2 left) Mini-DIN 4 cable for TMC-55Aa and TVC $45 (6 left) for TXM-17, -27 (TXM-27 requires speed calculation, and is usable only with TMC-55Aa, not with TVC) RJ-12 cable for TMC-55Aa and TVC $30 (1 left) for TXM-21, -21A, -21Aa, -21C, -25, -26 3.5mm cable for TMC-55Aa $30 (3 left) for TXM-22 (requires speed calculation, cannot be used with TVC) DE-9 M to F cable (see above section) can be used as a 6 foot or 3 foot extension for other cables. Cables & Remote for TTL Time Lapse and Animation Motor* Remote Release switch for TTL Time Lapse motor $29 (3 left) TTL to Bolex MM torque motor cable $39 (1 left) TTL to Relay Box cable, $29 (2 left) Cable for TXM-20 and TXM-26 series Crystal Motors* TXM-20 or TXM-26 to Bolex MM torque motor cable, $59 (0 left) *NOTE: Above prices are for cables and accessories originally manufactured in quantity and perhaps several years ago, when parts and labor costs were lower. Making up a discontinued cable on special order is likely to cost about $20-40 more than the regular prices shown. Sorry but we no longer make or repair Fischer cables (if soldering is required at the Fischer end) and we are short of parts for WPI cables. Power Supplies for studio use: 12 volts DC regulated at 1 amp for TTL time lapse motor, with XLR cable, $39 with USA power plug. (5 left) Stock levels are correct as of February 6, 2013 Ready to order now? Please see our ordering info page.

Accessories for Discontinued Models:

Rights Notice: Material on film, tape, disc or otherwise may be subject to stated or implied Copyright or Performance Right, or the right to privacy, etc. depending on the laws of your country. Unauthorized duplication may be a violation that is civil or criminal in nature. Equipment or services offered by TCS Inc. should not be construed as inviting criminal activity. The user should ascertain if duplication might violate any rights, and obtain a written release from each affected party. Consult your attorney about any specific instance.