Cables for TMC, TMC2, TMC2-LCD Milliframe Controller
and TVCe Videoframe Controller*:
NOTE: These WILL NOT FIT models TMC55Aa, TVC.

Fischer cable is $135.* For Arri 16-SR, 16-SR-HS and others and some 35mm cameras with the 11-pin Fischer connector. (6 left)
WPI (formerly Amphenol) cable is $60. For TCS TXM-10B, -10S, -12, -14, -15, -19 crystal motors and controls. Can also be used with Aaton cameras and TMC2 if 0.1mF capacitor is added ($10 extra) and if onboard battery is not used. (3 left)
DE-9 M to F cable is $15. For TCS TSC, TXM-D, -18, -20, -20B, -20K crystal motors and controls. (5 left)
Mini-DIN 4 cable is $45. For TCS TXM-17 crystal motor. (1 left)
RJ-12 cable is $30. For TCS TXM-21, -21A, -21Aa, -21Ab, -21C, -25, -25A, -26, -26B crystal motors and controls. (3 left)
3.5mm cable for TXM-22, TXM-22A. (1 left)

(The TVCe cannot be used with the TXM-22 or TXM-27 crystal motors.)

Cables for TMC-55Aa Milliframe Controller
and TVC Videoframe Controller*:
NOTE: These WILL NOT FIT models TMC2, TMC, TVCe.

WPI (formerly Amphenol) cable is $60. For TCS TXM-10B, -10S, -12, -14, -15, -19 crystal motors and controls. Can also be used with Aaton cameras if onboard battery is not used. (2 left)
Mini-DIN 4 cable for TMC-55Aa and TVC $45 (6 left)
    for TXM-17, -27 (TXM-27 requires speed calculation, and is usable only with TMC-55Aa, not with TVC)
RJ-12 cable for TMC-55Aa and TVC $30 (2 left)
    for TXM-21, -21A, -21Aa, -21C, -25, -26
3.5mm cable for TMC-55Aa $30 (2 left)
    for TXM-22 (requires speed calculation, cannot be used with TVC)

*NOTE:
Above prices are for cables and accessories originally manufactured in quantity and perhaps several years ago, when parts and labor costs were lower. Making up a discontinued cable on special order is likely to cost about $20-40 more than the regular prices shown.

Stock levels are correct as of January 1, 2008

TCS will no longer repair Fischer cables. This service has been discontinued.

Ready to order now? Please see our ordering info page.